Batteri (18kVA, 54kVA, 108kVA) (SKI)
EL-BAT-0000-08
6 måneders intervall
| Oppgave | Oppgavebeskrivelse | Lang-beskrivelse | Dokumentreferanse | Intervall | Myndighetsnivå | Type FV |
|---|---|---|---|---|---|---|
| 1000 | Påse at batteri er fulladet. |
System control and adjustment Calibration of AC and DC output voltage: Check that the AC and DC voltages are correct. If they deviate more than + - 1% - calibrate this value. AC and DC load anbad battery power control: Measure with an ampere meter that all currents are correct on the display in relation to the measured value. If the measured value deviates more than + - 2% from what the display shows - calibrate this value. DC output voltage control: Measure the DC voltage on the DC distribution with a little load connected. If this voltage on the display deviates more than 1% from the measured value - calibrate this value. Alarm relay test: Connect the PC and run the alarm relay output test to check all the alarm relays. For the battery bank check: The LI-Ion battery will run this control even via BSM Manual bypass function: Follow the procedure for manual bypass switch and enable / disable bypass switch
|
Østfoldbanen V L (Oslo S) - Ski, Ski Stasjon, UOS-90-A-56106_01D, UOS-90-A-56108_01D, UOS-90-A-56118_01D, UOS-90-A-56126_01D | 6 md | Lav | TK-M |
| 1010 | Påse at batterisystemet er rent, i orden, fri for skader og slitasje. |
System control and adjustment Calibration of AC and DC output voltage: Check that the AC and DC voltages are correct. If they deviate more than + - 1% - calibrate this value. AC and DC load anbad battery power control: Measure with an ampere meter that all currents are correct on the display in relation to the measured value. If the measured value deviates more than + - 2% from what the display shows - calibrate this value. DC output voltage control: Measure the DC voltage on the DC distribution with a little load connected. If this voltage on the display deviates more than 1% from the measured value - calibrate this value. Alarm relay test: Connect the PC and run the alarm relay output test to check all the alarm relays. For the battery bank check: The LI-Ion battery will run this control even via BSM Manual bypass function: Follow the procedure for manual bypass switch and enable / disable bypass switch
|
Østfoldbanen V L (Oslo S) - Ski, Ski Stasjon, UOS-90-A-56106_01D, UOS-90-A-56108_01D, UOS-90-A-56118_01D, UOS-90-A-56126_01D | 6 md | Lav | TK-V |
| 1020 | Påse at koblingene til batteribanken er ordentlig tilskrudd, og at batteriene og batteripolene er fri for lekkasjer. |
System control and adjustment Calibration of AC and DC output voltage: Check that the AC and DC voltages are correct. If they deviate more than + - 1% - calibrate this value. AC and DC load anbad battery power control: Measure with an ampere meter that all currents are correct on the display in relation to the measured value. If the measured value deviates more than + - 2% from what the display shows - calibrate this value. DC output voltage control: Measure the DC voltage on the DC distribution with a little load connected. If this voltage on the display deviates more than 1% from the measured value - calibrate this value. Alarm relay test: Connect the PC and run the alarm relay output test to check all the alarm relays. For the battery bank check: The LI-Ion battery will run this control even via BSM Manual bypass function: Follow the procedure for manual bypass switch and enable / disable bypass switch
|
Østfoldbanen V L (Oslo S) - Ski, Ski Stasjon, UOS-90-A-56106_01D, UOS-90-A-56108_01D, UOS-90-A-56118_01D, UOS-90-A-56126_01D | 6 md | Lav | TK-V |
| 1030 | Påse at batteribanken fungerer som den skal, ved å gjøre en batteriutladningstest. |
System control and adjustment Calibration of AC and DC output voltage: Check that the AC and DC voltages are correct. If they deviate more than + - 1% - calibrate this value. AC and DC load anbad battery power control: Measure with an ampere meter that all currents are correct on the display in relation to the measured value. If the measured value deviates more than + - 2% from what the display shows - calibrate this value. DC output voltage control: Measure the DC voltage on the DC distribution with a little load connected. If this voltage on the display deviates more than 1% from the measured value - calibrate this value. Alarm relay test: Connect the PC and run the alarm relay output test to check all the alarm relays. For the battery bank check: The LI-Ion battery will run this control even via BSM Manual bypass function: Follow the procedure for manual bypass switch and enable / disable bypass switch
|
Østfoldbanen V L (Oslo S) - Ski, Ski Stasjon, UOS-90-A-56106_01D, UOS-90-A-56108_01D, UOS-90-A-56118_01D, UOS-90-A-56126_01D | 6 md | Lav | TK-F |
| 1040 | Påse at kabler, koblinger og fordelingsskinner har god kontakt. |
System control and adjustment Calibration of AC and DC output voltage: Check that the AC and DC voltages are correct. If they deviate more than + - 1% - calibrate this value. AC and DC load anbad battery power control: Measure with an ampere meter that all currents are correct on the display in relation to the measured value. If the measured value deviates more than + - 2% from what the display shows - calibrate this value. DC output voltage control: Measure the DC voltage on the DC distribution with a little load connected. If this voltage on the display deviates more than 1% from the measured value - calibrate this value. Alarm relay test: Connect the PC and run the alarm relay output test to check all the alarm relays. For the battery bank check: The LI-Ion battery will run this control even via BSM Manual bypass function: Follow the procedure for manual bypass switch and enable / disable bypass switch
|
Østfoldbanen V L (Oslo S) - Ski, Ski Stasjon, UOS-90-A-56106_01D, UOS-90-A-56108_01D, UOS-90-A-56118_01D, UOS-90-A-56126_01D | 6 md | Lav | TK-V |
Oppgave: 1000
Oppgavebeskrivelse
Påse at batteri er fulladet.Lang-beskrivelse
System control and adjustment
Calibration of AC and DC output voltage:
Check that the AC and DC voltages are correct.
If they deviate more than + - 1% - calibrate this value.
AC and DC load anbad battery power control:
Measure with an ampere meter that all currents are correct on the display in relation to the measured value.
If the measured value deviates more than + - 2% from what the display shows - calibrate this value.
DC output voltage control:
Measure the DC voltage on the DC distribution with a little load connected. If this voltage on the display deviates more than 1% from the measured value - calibrate this value.
Alarm relay test:
Connect the PC and run the alarm relay output test to check all the alarm relays.
For the battery bank check: The LI-Ion battery will run this control even via BSM
Manual bypass function:
Follow the procedure for manual bypass switch and enable / disable bypass switch
Dokumentreferanse
Østfoldbanen V L (Oslo S) - Ski, Ski Stasjon, UOS-90-A-56106_01D, UOS-90-A-56108_01D, UOS-90-A-56118_01D, UOS-90-A-56126_01D- Intervall 6 md
- Myndighetsnivå Lav
- Type FV TK-M
Oppgave: 1010
Oppgavebeskrivelse
Påse at batterisystemet er rent, i orden, fri for skader og slitasje.Lang-beskrivelse
System control and adjustment
Calibration of AC and DC output voltage:
Check that the AC and DC voltages are correct.
If they deviate more than + - 1% - calibrate this value.
AC and DC load anbad battery power control:
Measure with an ampere meter that all currents are correct on the display in relation to the measured value.
If the measured value deviates more than + - 2% from what the display shows - calibrate this value.
DC output voltage control:
Measure the DC voltage on the DC distribution with a little load connected. If this voltage on the display deviates more than 1% from the measured value - calibrate this value.
Alarm relay test:
Connect the PC and run the alarm relay output test to check all the alarm relays.
For the battery bank check: The LI-Ion battery will run this control even via BSM
Manual bypass function:
Follow the procedure for manual bypass switch and enable / disable bypass switch
Dokumentreferanse
Østfoldbanen V L (Oslo S) - Ski, Ski Stasjon, UOS-90-A-56106_01D, UOS-90-A-56108_01D, UOS-90-A-56118_01D, UOS-90-A-56126_01D- Intervall 6 md
- Myndighetsnivå Lav
- Type FV TK-V
Oppgave: 1020
Oppgavebeskrivelse
Påse at koblingene til batteribanken er ordentlig tilskrudd, og at batteriene og batteripolene er fri for lekkasjer.Lang-beskrivelse
System control and adjustment
Calibration of AC and DC output voltage:
Check that the AC and DC voltages are correct.
If they deviate more than + - 1% - calibrate this value.
AC and DC load anbad battery power control:
Measure with an ampere meter that all currents are correct on the display in relation to the measured value.
If the measured value deviates more than + - 2% from what the display shows - calibrate this value.
DC output voltage control:
Measure the DC voltage on the DC distribution with a little load connected. If this voltage on the display deviates more than 1% from the measured value - calibrate this value.
Alarm relay test:
Connect the PC and run the alarm relay output test to check all the alarm relays.
For the battery bank check: The LI-Ion battery will run this control even via BSM
Manual bypass function:
Follow the procedure for manual bypass switch and enable / disable bypass switch
Dokumentreferanse
Østfoldbanen V L (Oslo S) - Ski, Ski Stasjon, UOS-90-A-56106_01D, UOS-90-A-56108_01D, UOS-90-A-56118_01D, UOS-90-A-56126_01D- Intervall 6 md
- Myndighetsnivå Lav
- Type FV TK-V
Oppgave: 1030
Oppgavebeskrivelse
Påse at batteribanken fungerer som den skal, ved å gjøre en batteriutladningstest.Lang-beskrivelse
System control and adjustment
Calibration of AC and DC output voltage:
Check that the AC and DC voltages are correct.
If they deviate more than + - 1% - calibrate this value.
AC and DC load anbad battery power control:
Measure with an ampere meter that all currents are correct on the display in relation to the measured value.
If the measured value deviates more than + - 2% from what the display shows - calibrate this value.
DC output voltage control:
Measure the DC voltage on the DC distribution with a little load connected. If this voltage on the display deviates more than 1% from the measured value - calibrate this value.
Alarm relay test:
Connect the PC and run the alarm relay output test to check all the alarm relays.
For the battery bank check: The LI-Ion battery will run this control even via BSM
Manual bypass function:
Follow the procedure for manual bypass switch and enable / disable bypass switch
Dokumentreferanse
Østfoldbanen V L (Oslo S) - Ski, Ski Stasjon, UOS-90-A-56106_01D, UOS-90-A-56108_01D, UOS-90-A-56118_01D, UOS-90-A-56126_01D- Intervall 6 md
- Myndighetsnivå Lav
- Type FV TK-F
Oppgave: 1040
Oppgavebeskrivelse
Påse at kabler, koblinger og fordelingsskinner har god kontakt.Lang-beskrivelse
System control and adjustment
Calibration of AC and DC output voltage:
Check that the AC and DC voltages are correct.
If they deviate more than + - 1% - calibrate this value.
AC and DC load anbad battery power control:
Measure with an ampere meter that all currents are correct on the display in relation to the measured value.
If the measured value deviates more than + - 2% from what the display shows - calibrate this value.
DC output voltage control:
Measure the DC voltage on the DC distribution with a little load connected. If this voltage on the display deviates more than 1% from the measured value - calibrate this value.
Alarm relay test:
Connect the PC and run the alarm relay output test to check all the alarm relays.
For the battery bank check: The LI-Ion battery will run this control even via BSM
Manual bypass function:
Follow the procedure for manual bypass switch and enable / disable bypass switch
Dokumentreferanse
Østfoldbanen V L (Oslo S) - Ski, Ski Stasjon, UOS-90-A-56106_01D, UOS-90-A-56108_01D, UOS-90-A-56118_01D, UOS-90-A-56126_01D- Intervall 6 md
- Myndighetsnivå Lav
- Type FV TK-V